home *** CD-ROM | disk | FTP | other *** search
- Path: rafs.shadow.net!not-for-mail
- From: zonum@rafs.shadow.net (Rafael Munoz)
- Newsgroups: comp.sys.amiga.networking
- Subject: AWeb v1.0 and crashes...
- Date: 24 Mar 1996 19:47:51 GMT
- Organization: Raf's Place - Miami, Florida
- Message-ID: <4j48t7$m95@viper.shadow.net>
- NNTP-Posting-Host: ppp-mia-60.shadow.net
- Summary: AWeb, Cgfx
- Keywords: AWeb v1.0, cgfx
- X-Newsreader: TIN [AMIGA 1.3 950726BETA PL0]
-
- Hi all,
-
- I also have problems with AWeb v1.0 (I have sent all of the info
- to Yvon already, but I want to see if others are having the
- same problem - I sent him also some Enforcer hits I was able to
- capture!). The problem I experienced, and it is something that
- happens ALL of the times, in other words, I can make it happen
- every single time I run it, is that when I exit/quit AWeb, while
- running on an (registered) CyberGraphX v2.16 800x600x16-bit screen
- using the 24-bit picture.datatype v43.668, I ALWAYS, ALWAYS, w/o
- failure, get a System Crash #80000008 - this is w/o failure! It
- runs flawlessly, however, while it is running - it is FAST and it
- looks GREAT w/24bit DT; just AWESOME!
-
- If I run AWeb either on my cgfx 800x600x256 WB screen or on its
- own cgfx 800x600x256 screen, it works fine - no problems when
- exiting/quitting!
-
- I have also removed my WBStartup drawer and the only thing I have in
- my Startup-Sequence is PrepreEmul (for ShapeShifter's use), and the
- only thing that I have in my User-Startup are assigns, paths, setenv's
- and the AmiTCP assign stuff and the MUI assign stuff and that is it!
- No hacks except for CyberGraphX and the 24-bit picture.datatype!
-
- Anyway, just want to hear from anyone that may have similar problems!
- My system is: A3000@25, 16 Meg FAST, 2 Meg CHIP, Picasso-II
- w/registered CyberGraphX v2.16, AmiTCP, WB40.42/KS40.68. Ok, that is
- it!
-
-